Arlanxeo butadiene rubbers for plastic modification are produced by a solution polymerization process which enables the production of very pure, virtually gel-free, very clean and almost colorless products. These rubbers are manufactured either in an anionic process or using Ziegler-Natta catalyst systems. The use of organometallic catalysts produces highly uniform polymers that are particularly suited for use in HIPS and for the m-ABS.
Product Name |
Description |
Application |
Supplier |
File |
BUNA® CB 70 GPT |
Buna® CB 70 GPT Lithium Butadiene Rubber. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 "Rubber articles intended for repeated use", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 70 GPT is used for the production of HIPS particularly to attain an improved stress cracking resistance. It can be used either alone or in blend with Buna® CB 565 T or SB-Polymers to achieve polystyrene with improved surface gloss. |
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 55 GPT |
Buna® CB 55 GPT is a Lithium Butadiene Rubber. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 ""Rubber articles intended for repeated use"", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 55 GPT is used for the production of HIPS. It is used either alone or in blend with Buna® CB 565 T or with SB-Polymers to achieve polystyrene with improved surface gloss. In blends with Buna® CB 70 GPT it is possible to attain an improved stress cracking resistance.
|
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 530 T |
Buna® CB 530 T is a Lithium Butadiene Rubber. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 ""Rubber articles intended for repeated use"", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 530 T is used for the production of HIPS particularly to attain an improved stress cracking resistance. It can be used either alone or in blend with Buna® CB 565 T or with SB-Polymers to achieve polystyrene with improved surface gloss.
|
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 550 T |
Buna® CB 550 T is a Lithium Butadiene Rubber. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 ""Rubber articles intended for repeated use"", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 550 T is used for the production of ABS and HIPS. For HIPS it is used either alone or in blend with Buna® CB 565 T or with SB_Polymers to achieve polystyrene with improved surface gloss. In blends with Buna® CB 530 T it is possible to attain an improved stress cracking resistance. |
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 550 IP |
Buna® CB 550 IP is a Lithium Butadiene Rubber. The rubber is protected by a nonylphenol-free stabiliser system which is in chemical compliance with the FDA regulation §177.2600 ""Rubber articles intended for repeated use"", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 550 IP is used for the production of ABS and HIPS. For HIPS it is used either alone or in blend with Buna® CB 565 T or with SB-Polymers to achieve polystyrene with improved surface gloss. In blends with Buna® CB 530 T it is possible to attain an improved stress cracking resistance. |
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 565 T |
Buna® CB 565 T is a Lithium Butadiene Rubber. By the addition of a special coupling agent the polymer has been branched during its polymerization yielding to a star shaped macro structure. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 ""Rubber articles intended for repeated use"", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 565 T is used for the production of ABS and HIPS. For HIPS it is used either alone or in blend with regular Buna® CB grades or with SB-Polymers to achieve polystyrene with improved surface gloss. In blends with Buna® CB 530 T it is possible to attain an improved stress cracking resistance. |
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 550 |
Buna® CB 550 (former Taktene 550) Lithium Butadiene Rubber. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 "Rubber articles intended for repeated use", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 550 is used for the production of ABS and HIPS. For HIPS it is used either alone or in blend with Buna® CB 565 T or with SB-Polymers to achieve polystyrene with improved surface gloss. In blends with Buna® CB 530 T it is possible to attain an improved stress cracking resistance. |
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 380 |
Buna® CB 380 (former Taktene 380) is a Lithium Butadiene Rubber. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 "Rubber articles intended for repeated use", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 380 is used for the production of ABS and HIPS. For HIPS it is used either alone or in blend with Buna® CB 565 T or SB-Polymers to achieve polystyrene with improved surface gloss. In blends with Buna® CB 530 T it is possible to attain an improved stress cracking resistance. |
HIPS |
ARLANXEO(TSR) |
|
BUNA® CB 728 T |
Buna® CB 728 T is a Neodymium Butadiene Rubber. The rubber is protected by a stabiliser system which is in chemical compliance with the FDA regulation §177.2600 "Rubber articles intended for repeated use", the recommendation VI of the Federal Institute for Risk Assessment and the Commission Regulation (EU) No 10/2011 and amendments until today. Buna® CB 728 T is used for the production of HIPS either alone or in blend with other Buna® CB grades, as such as Buna® CB 550 T and Buna® CB 380. In blend with Buna® CB 565 T or SB-Polymers an improved surface gloss can be attained. |
HIPS |
ARLANXEO(TSR) |
|